Page 1 of 1
DC-AIO and cable shields. To Machine chassis ground?
Posted: Wed Feb 18, 2015 3:47 pm
by countryguy
Darn - Forgot to ask 1 other question- The 3 Encoder wire jackets includes a shield wire w/ foil wrap Do you usually put the Shield of the cable to power GND or chassis ground? TIA.
Jeff.
Re: DC-AIO and cable shields. To Machine chassis ground?
Posted: Wed Feb 18, 2015 7:16 pm
by cncsnw
Solder the shields to the outer shell of the DE9 connectors. That will connect them to chassis ground.
Re: DC-AIO and cable shields. To Machine chassis ground?
Posted: Wed Feb 18, 2015 7:54 pm
by countryguy
Thank you very much for the speedy reply's here and on CNCZone! You guy's are awesome!
CG.