Remedy with centroid controls
Moderator: cnckeith
-
trd
- Posts: 1
- Joined: Wed Sep 19, 2018 10:49 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 10879
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Remedy with centroid controls
I am trying to get my machine to produce a vertical keyway and I can't get the spindle to orientate center of x and y. Tool looks like this / and not this I. Is there a code I am missing?
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
tblough
- Community Expert
- Posts: 3539
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Remedy with centroid controls
It's going to take a little more information than that to diagnose your problem. Do you have any photos of what you are trying to do? Attach some of those along with the G code you are trying to run and a system report and we'll try to track down what's happening.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)