******* CNC12 v5.24 and M297 bug work around. *******

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Site Admin
Posts: 8941
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

******* CNC12 v5.24 and M297 bug work around. *******

Post by cnckeith »

CNC12 v5.24 and M297

if you installed CNC12 v5.24, please open your cncm.hom or cnct.hom program and delete the line that has "M297" on it save the file,
and then restart CNC12.

better yet install version v5.26 which has the M297 bug fixed.
https://www.centroidcnc.com/centroid_di ... loads.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”