Page 1 of 1
H100 vfd
Posted: Sun Dec 01, 2024 9:10 pm
by Ashb82
I have an Amazon vfd H100, I would like to run it on my spindle motor if possible, where does the vfd 0-10 dc+ and com wire into on this inverter. Any wiring help would be very much appreciated
Re: H100 vfd
Posted: Sun Dec 01, 2024 9:18 pm
by ShawnM
COM and AI1 as noted in the lower left of the diagram.
Re: H100 vfd
Posted: Sun Dec 01, 2024 10:52 pm
by Ken Rychlik
You may need to program parameters in the vfd for it to work the way you want. Normally they are set up for keypad of the vfd to turn on and set speed.
Re: H100 vfd
Posted: Mon Dec 02, 2024 1:15 am
by cncsnw
COM and AI1 as noted in the lower left of the diagram.
Where COM = "GND".
You do
not connect anything to P12 or AI2.