Page 2 of 2
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Posted: Wed Oct 27, 2021 3:46 pm
by CivilCNC
SOLVED. by setting screen resolution to 1980×1020
It was set much lower. Thanks everyone.
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Posted: Thu Oct 28, 2021 5:00 pm
by cnckeith
great, thanks for reporting back. yep cnc12 and vcp need to be at 16:9 and ideally at 1920x1080. the report.zip would have told me what resolution you have the PC set at:-)) that's why we are always asking for a fresh report.zip
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Posted: Sat Oct 30, 2021 2:00 am
by CivilCNC
cnckeith wrote: ↑Thu Oct 28, 2021 5:00 pm
great, thanks for reporting back. yep cnc12 and vcp need to be at 16:9 and ideally at 1920x1080. the report.zip would have told me what resolution you have the PC set at:-)) that's why we are always asking for a fresh report.zip
I dont know what a report.zip is
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Posted: Sat Oct 30, 2021 7:17 am
by tblough
CivilCNC wrote: ↑Sat Oct 30, 2021 2:00 am
I dont know what a report.zip is
Take a look at Keith's signature in the post above.