Page 2 of 2
Re: Software will not load
Posted: Tue Feb 05, 2019 9:01 pm
by Kutton
cncman172 wrote: ↑Tue Feb 05, 2019 10:28 am
Kutton,
Watch this video from Marty and see if you have a static IP address configured in Windows for Acorn board.
Russ
Do this test!
viewtopic.php?f=61&t=1451
You guys nailed it thank so much.
Re: Software will not load
Posted: Tue Feb 05, 2019 9:15 pm
by martyscncgarage
Kutton wrote: ↑Tue Feb 05, 2019 9:01 pm
cncman172 wrote: ↑Tue Feb 05, 2019 10:28 am
Kutton,
Watch this video from Marty and see if you have a static IP address configured in Windows for Acorn board.
Russ
Do this test!
viewtopic.php?f=61&t=1451
You guys nailed it thank so much.
Make sure you are doing reports as you make progress....
Marty