Bought an Acorn board already installed for a change, need a hand...

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
AntsOftheSky
Posts: 26
Joined: Sun Dec 31, 2023 9:19 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Bought an Acorn board already installed for a change, need a hand...

Post by AntsOftheSky »

Hey guys, thank you to all who helped me. I have rewired and tuned the machine this past week to have the cleanest wiring we can.

Everything works great. Might need some help with the ATC but i think I can get a start on that myself.

Top
cnckeith
Site Admin
Posts: 8942
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Bought an Acorn board already installed for a change, need a hand...

Post by cnckeith »

great glad to hear that and thanks for reporting back.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”