Anilam Crusader series M converting to Allin1DC

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Robert Meacham
Posts: 31
Joined: Tue Jan 28, 2025 1:41 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: A901522
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Anilam Crusader series M converting to Allin1DC

Post by Robert Meacham »

tblough wrote: ↑Tue Feb 11, 2025 9:42 pm According to this: viewtopic.php?p=94703#p94703 it should be fixed in the latest version.
Ok I'll try that tomorrow, thank you

Top
CentroidFrog
Tech Support
Posts: 141
Joined: Wed Jan 29, 2025 9:39 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Anilam Crusader series M converting to Allin1DC

Post by CentroidFrog »

Hi Robert,
If you haven't yet please post a fresh report.zip so we can see useful information about your CNC12 installation.

Here's a link to where you can download the newest version of CNC12:
https://www.centroidcnc.com/centroid_di ... loads.html

The release notes and install instructions are on that same page.
Want to post your own question?
Check this out first: http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Acorn CNC tech tips: viewforum.php?f=63

Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”