Fusion 360 Mill Post Processor for Centroid CNC's with additional Features

DanielCNC · Post by **DanielCNC** » Fri Sep 03, 2021 7:25 am

hello, I cannot find in fusion 360 the centroid post processor to use the 4th axis.

DanielCNC · Post by **DanielCNC** » Mon Oct 16, 2023 4:44 am

Hello, I am a user of CENTROÏD ACORN and on this subject I would like to share with you my passion for 3D and you can watch my YouTube channel. I will post videos about my DIY router. You can subscribe and activate the bell to receive all the news. THANKS.

cncot · Post by **cncot** » Tue Jul 23, 2024 5:34 pm

I went on Github and tried to download the software post for Fusion. I clicked on everything I found on the page and could not find anything that would start the download. I am noe an expert on Github. How do I do this?

Post by **cnckeith** » Mon Oct 07, 2024 5:10 pm

https://github.com/swissi2000/Fusion-36 ... r-Centroid

Centroid Community CNC Support Forum

Fusion 360 Mill Post Processor for Centroid CNC's with additional Features

Re: Fusion 360 Mill Post Processor for Acorn with additional Features

Re: Fusion 360 Mill Post Processor for Acorn with additional Features

Re: Fusion 360 Mill Post Processor for Centroid CNC's with additional Features

Re: Fusion 360 Mill Post Processor for Centroid CNC's with additional Features