Hi everyone,
I am struggling to figure out how to wire up an Advanced Motion Controls PWM Servo Amplifier for my Dyna Myte 3000 conversion. I am attempting to use the existing DC servo spindle, but I'm having trouble connecting the motor and driver and controlling them with the Acorn.
The machine came with a 30A20AC Advanced Motion Controls PWM Servo Amplifier when I purchased it, and the spindle motor is a SEM MT30 U4-48. The motor junction box has some markings inside, and I have attached some images of the driver connections and the driver spec sheet.
If anyone has experience with this type of setup, I would greatly appreciate any guidance you could provide me.
Also, I am attaching my Google Photo link with additional images and specs.
Thank you.
L.Adams
New River, AZ
Update: I added a wiring diagram PDF for how I currently have it wired.
https://photos.app.goo.gl/Y94mwSYnB1y4CFpp7
Dyna Myte 3000 Spindle Driver Help
Moderator: cnckeith
-
- Posts: 32
- Joined: Tue Aug 15, 2023 10:21 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 98F07B936216-0504237156
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Dyna Myte 3000 Spindle Driver Help
- Attachments
-
- Wiring Diagram.pdf
- (205.88 KiB) Downloaded 30 times
-
- report_98F07B92168A-1103237630_2024-01-07_13-36-08.zip
- (842.12 KiB) Downloaded 25 times
-
- AMC_Datasheet_30A20AC.pdf
- (537.68 KiB) Downloaded 31 times
-Lee
New River, AZ
New River, AZ