Made a custom base for an natural sharpening stone.
No CAM used, but the old Centroid Mold Magic, that is easy and fast for such kind of job.
Uwe
Reverse engineering with probing cycle
Moderator: cnckeith
-
- Posts: 7490
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Reverse engineering with probing cycle
nice example of Centroid grid digitizing use, thanks for posting.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2226
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Reverse engineering with probing cycle
By the way mold magic runs with Win10 too.
It is a great tool for jobs like this, under 60s work to generate an inverted file with different diameter mill an with roughing and finishing.
Had some air cuts, but better 5min air cuts as working hours with meshmixer and fusion
Air cuts came because my probing depth was deeper than the cut i needed...
Uwe
It is a great tool for jobs like this, under 60s work to generate an inverted file with different diameter mill an with roughing and finishing.
Had some air cuts, but better 5min air cuts as working hours with meshmixer and fusion
Air cuts came because my probing depth was deeper than the cut i needed...
Uwe
Last edited by suntravel on Tue Sep 27, 2022 3:37 pm, edited 1 time in total.
-
- Posts: 535
- Joined: Sat Aug 11, 2018 11:22 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Oregon
Re: Reverse engineering with probing cycle
I found a post with a link to the Mold Magic Program https://centroidcncforum.com/viewtopic. ... gic#p57914
Any words of wisdom before I load it up and try it?
Any words of wisdom before I load it up and try it?
My Tree J325 & Projectshttps://photos.app.goo.gl/LLHf8M84eQYwP3ph6
MAKING PARTS https://www.youtube.com/shorts/MSQ4TyTzFkk
Hardinge CHNC4 Retrofithttps://photos.app.goo.gl/244YnF9ykyUf7mfq7
MAKING PARTS https://www.youtube.com/shorts/MSQ4TyTzFkk
Hardinge CHNC4 Retrofithttps://photos.app.goo.gl/244YnF9ykyUf7mfq7
-
- Posts: 2226
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Reverse engineering with probing cycle
that should work.....lavrgs wrote: ↑Tue Sep 27, 2022 3:30 pm I found a post with a link to the Mold Magic Program https://centroidcncforum.com/viewtopic. ... gic#p57914
Any words of wisdom before I load it up and try it?
... at your own risk
Uwe
-
- Posts: 535
- Joined: Sat Aug 11, 2018 11:22 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Oregon
Re: Reverse engineering with probing cycle
My Tree J325 & Projectshttps://photos.app.goo.gl/LLHf8M84eQYwP3ph6
MAKING PARTS https://www.youtube.com/shorts/MSQ4TyTzFkk
Hardinge CHNC4 Retrofithttps://photos.app.goo.gl/244YnF9ykyUf7mfq7
MAKING PARTS https://www.youtube.com/shorts/MSQ4TyTzFkk
Hardinge CHNC4 Retrofithttps://photos.app.goo.gl/244YnF9ykyUf7mfq7
-
- Posts: 7490
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Reverse engineering with probing cycle
we need to free up some programmer time to rewrite that great program! I use Rhino to make curve offsets now but would be nice to have an updated version of Mold Magic... After AcornSix and Hickory!suntravel wrote: ↑Tue Sep 27, 2022 2:20 pm By the way mold magic runs with Win10 too.
It is a great tool for jobs like this, under 60s work to generate an inverted file with different diameter mill an with roughing and finishing.
Had some air cuts, but better 5min air cuts as working hours with meshmixer and fusion
Air cuts came because my probing depth was deeper than the cut i needed...
Uwe
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html