Can I use G83 on non-Z axis?
Moderator: cnckeith
-
- Posts: 1
- Joined: Wed Aug 17, 2022 12:34 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3403DE6EA88E-0624192186
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Can I use G83 on non-Z axis?
Is there a way to use a G83 code for drilling with the 4th axis? I have my bed mill set up with the head being axis z and the quill being the 4th axis. The inetia load of moving the entire head and counterweight for rapid drilling of parts with many deep holes is not ideal. I want to keep the head as the Z axis for machining since it has very little backlash. I am driving the quill with the 4th axis. The backlash is too great for machining but OK for drilling. I was wondering if anyone knows how to swap an axis for G83 or edit the background G83 code to make it functional with the 4th axis.