Spindle parameters

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Bastard Thread
Posts: 10
Joined: Sun Mar 25, 2018 1:28 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Spindle parameters

Post by Bastard Thread »

Iam having trouble finding where to enter values for inp 63 and inp 64.

Thanks Keith.

Screenshot_20200124-111854_Photo Editor.jpg

Top
cnckeith
Site Admin
Posts: 8962
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Spindle parameters

Post by cnckeith »

page 293 of the operator manual.
https://www.centroidcnc.com/centroid_di ... -v4.14.pdf

page 58 of allin1dc install manual.
https://www.centroidcnc.com/downloads/c ... manual.pdf

to enter spindle range values for p65-67 go to parameters screen

f1 setup, f3 config, f3 parameters...
be sure to press F10 to save your entries.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Bastard Thread
Posts: 10
Joined: Sun Mar 25, 2018 1:28 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Spindle parameters

Post by Bastard Thread »

Thanks Keith, I have the top part of the page ok. It was were to go for Inp 63 and inp 64.
Thanks Keith O.

Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”