Dimension Drawings for Acorn Components

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Garyhlucas
Posts: 10
Joined: Thu Aug 22, 2019 10:03 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Dimension Drawings for Acorn Components

Post by Garyhlucas »

I am building a CNC Router for our local FIRST Robotics team and I am laying out the control panel. I found mounting dimensions for the Acorn board, but not the relay board or the power supply. Are these available? 3D models would be even better, I have the whole machine modeled in SolidWorks.

Top
cnckeith
Site Admin
Posts: 8952
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Dimension Drawings for Acorn Components

Post by cnckeith »

hello. page 13 and 14 has Acorn and the relay board basic dimensions. https://www.centroidcnc.com/centroid_di ... manual.pdf

and here is the logic power supply web page. https://www.meanwell-web.com/en-gb/ac-d ... ut-rd--35b
and spec sheet. https://www.meanwell-web.com/content/fi ... 5-spec.pdf

sorry, I don't have solid models, its on the to do list.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”