Edit a G Code

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Aplus
Posts: 45
Joined: Wed Mar 20, 2019 2:15 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: A900730
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Edit a G Code

Post by Aplus »

When I first started using my machine, after loading a g-code program and pressing F5 (edit), notepad++ would open but now just notepad opens the g-code. What controls this button? I don't remember changing anything.

Top
cnckeith
Site Admin
Posts: 9008
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Edit a G Code

Post by cnckeith »

Windows controls it. set windows file extension type default editor to Notepad ++ for .txt, .cnc, .nc, .dig etc.. in windows.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”