Due to work and health issues I have to leave my projects for periods of time and forget what's next.
My mill works but needs to be dialed in, my lathes are in various states.
I don't see anything in the AllInOne or Acorn manual. Is there such a thing out there?
Clay
Curious: Is there retrofit flow chart for Centroid machine retrofit??
Moderator: cnckeith
-
frijoli
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Curious: Is there retrofit flow chart for Centroid machine retrofit??
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
martyscncgarage
- Community Expert
- Posts: 9958
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: Yes
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mesa, AZ
Re: Curious: Is there retrofit flow chart for Centroid machine retrofit??
Clay, I suggest you use the All in One DC Installation guide. Follow it beginning to end. Put a sticky note with a date on it where you left off. The installation manuals were written with installation workflow in mind.frijoli wrote: ↑Sat Jul 06, 2019 9:08 pm Due to work and health issues I have to leave my projects for periods of time and forget what's next.
My mill works but needs to be dialed in, my lathes are in various states.
I don't see anything in the AllInOne or Acorn manual. Is there such a thing out there?
Clay
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
frijoli
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: Curious: Is there retrofit flow chart for Centroid machine retrofit??
Marty, that's too easy and makes too much sense. lolmartyscncgarage wrote: ↑Sun Jul 07, 2019 9:09 am
Clay, I suggest you use the All in One DC Installation guide. Follow it beginning to end. Put a sticky note with a date on it where you left off. The installation manuals were written with installation workflow in mind.
Marty
Clay
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
(Note: Liking will "up vote" a post in the search results helping others find good information faster)