VCP not working <answered>
Moderator: cnckeith
-
B1 SCOTT
- Posts: 16
- Joined: Fri Dec 07, 2018 1:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900702
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Olive Branch, MS
VCP not working <answered>
I finally got everything wired up and am ready to jog the motors on my mill. I can't adjust the feedrate with the VCP. I tried other buttons nothing works. I downloaded the latest version 4.14
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
B1 SCOTT
- Posts: 16
- Joined: Fri Dec 07, 2018 1:32 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900702
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Olive Branch, MS
Re: VCP not working
Here is a report if it helps. I was on my way out the door to my kids baseball game earlier and was in a hurry.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
cnckeith
- Site Admin
- Posts: 8956
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: VCP not working
message log shows you still have some parameters to set and voltage checks to do..
please follow the allin1dc install manual (recently updated)
https://www.centroidcnc.com/downloads/c ... manual.pdf
and marty's allin1dc install videos.
viewtopic.php?f=20&t=2421
please follow the allin1dc install manual (recently updated)
https://www.centroidcnc.com/downloads/c ... manual.pdf
and marty's allin1dc install videos.
viewtopic.php?f=20&t=2421
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
AcornJosh
- Posts: 78
- Joined: Tue Apr 17, 2018 8:58 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: VCP not working
According to the report, the currently used PLC program does not support VCP. Please save a report and follow step 7 of Tech Bulletin 311 to update your PLC and copy your config files.
I suspect you installed 4.14, installed a PLC, and then loaded your older report which loaded the old PLC.
I suspect you installed 4.14, installed a PLC, and then loaded your older report which loaded the old PLC.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)