Screw Terminals vs DB25 Header
Moderator: cnckeith
-
- Posts: 140
- Joined: Fri Mar 02, 2018 12:01 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: haven't installed CNC12 yet
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Screw Terminals vs DB25 Header
Out of curiosity, where is parameter 968 and the table for it's values documented? I can't find it in the manual.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Screw Terminals vs DB25 Header
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 140
- Joined: Fri Mar 02, 2018 12:01 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: haven't installed CNC12 yet
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Screw Terminals vs DB25 Header
Marty, thanks! So, in other words it's kinda undocumented? In the manual, params 900-999 are listed as PLC Program Parameters. BTW, is the same param and setting valid for Mill Pro?
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Screw Terminals vs DB25 Header
Yes.
It's undocumented, use at your own risk. Anything above 400k requires good wiring practice and a drive that accepts a pulse train over 400k
It's undocumented, use at your own risk. Anything above 400k requires good wiring practice and a drive that accepts a pulse train over 400k
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 83
- Joined: Mon Jan 01, 2018 6:47 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Bisbane Australia
Re: Screw Terminals vs DB25 Header
With so many being recommended to use 100k centroid probably should add that to the 200 and 400kHz options in the wizard.
-
- Posts: 2232
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Screw Terminals vs DB25 Header
Its already in the next version