Hardinge TFB
Moderator: cnckeith
-
- Posts: 3151
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Hardinge TFB
Milton,
That's actually the stock Hardinge control enclosure. I had to cut out the fan and grill openings.
That's actually the stock Hardinge control enclosure. I had to cut out the fan and grill openings.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 3151
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Hardinge TFB
Final updated schematic. Needed to invert the Z-axis handwheel encoder; added a Z-axis glass scale; added spindle motor fan; swapped the status light for a two color red/green indicator (green when ready to run/flashing red when in e-stop or faulted). With the addition of the z-scale, this fills up the OAK's available encoders with 2 servo feedbacks, 2 handwheels, 2 glass scales, and 1 spindle encoder. All of the encoder and servo cables are documented on the schematic.
- Attachments
-
- HLV-H10140T-CNC-Final.pdf
- (489.91 KiB) Downloaded 291 times
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Hardinge TFB
Tom, Hello. very impressive install. thanks for taking the time to post photos so other could see your work. K
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 62
- Joined: Sat Mar 18, 2017 12:37 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: Hardinge TFB
looks nice, what ballscrews did you use?
Todd
Todd
-
- Posts: 3151
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Hardinge TFB
They were from Hiwin made to my specs. 25mm diameter with 5mm pitch on Z and 16mm diameter with 2.5mm pitch on X.
- Attachments
-
- Hiwin Ballscrews Production Drawings.pdf
- (443.73 KiB) Downloaded 246 times
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 62
- Joined: Sat Mar 18, 2017 12:37 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: Hardinge TFB
got an old chucker to convert. that had almost no use. thanks
-
- Posts: 3151
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Hardinge TFB
Hiwin is great, and custom screws are not much more than standard screws elsewhere. Quality and specs are top notch and screws are made in Taiwan - not China.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 109
- Joined: Sat Oct 06, 2018 9:35 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Hardinge TFB
tblough wrote: ↑Tue Jan 16, 2018 1:40 pm Final updated schematic. Needed to invert the Z-axis handwheel encoder; added a Z-axis glass scale; added spindle motor fan; swapped the status light for a two color red/green indicator (green when ready to run/flashing red when in e-stop or faulted). With the addition of the z-scale, this fills up the OAK's available encoders with 2 servo feedbacks, 2 handwheels, 2 glass scales, and 1 spindle encoder. All of the encoder and servo cables are documented on the schematic.
Mind sharing what program you use for creating your schematics?
-
- Posts: 3151
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Hardinge TFB
I don't mind sharing, but I'm afraid it's not going to be of use for most people. The schematics were done with AutoCAD Electrical which is an extremely pricey piece of software. Fortunately, Autodesk is very education friendly and my work gives me access to the academic versions of Autodesk software.Wolfenstien wrote: ↑Sun Feb 17, 2019 8:57 am Mind sharing what program you use for creating your schematics?
If AE wasn't an option, I probably would have used KiCad.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 3151
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Hardinge TFB
Found a few more photos in the archives:
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.