Spindle Delay <answered>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
martyscncgarage
Community Expert
Posts: 9958
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: Yes
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: Yes
Hickory CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Mesa, AZ

Re: Spindle Delay <answered>

Post by martyscncgarage »

cncnewguy wrote: ↑Sat Dec 08, 2018 2:55 am Marty,

I think you answered my question. I did not think I could use the ACORN board to control the power on/off of the VFD for the reasons you mentioned.
If you go to Centroid's web site for the OAK or All in One DC and down load their schematics packages, you can see examples of how they wire their VFDs(Inverters).
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ

Top
cncnewguy
Posts: 43
Joined: Sat Nov 24, 2018 10:42 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D2695947FE-1222170399
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Spindle Delay <answered>

Post by cncnewguy »

Thank you. I will check that out.

Top
cncnewguy
Posts: 43
Joined: Sat Nov 24, 2018 10:42 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D2695947FE-1222170399
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Spindle Delay <answered>

Post by cncnewguy »

I went to the link and download the wiring diagrams you mentioned but most files failed to open. Of the one that I could open I did not learn much from the diagram. I will just turn on the VFD from a switch.

Top
Post Reply

Return to “Centroid Acorn CNC Controller”