Can I use the autotune feature in cnc11 to tune my motors for use with mach 3. I tried with the demo version but it doesn't work.
I'm having trouble getting the motors tuned . It's the last thing I need to make the machine operational.
**RESOLVED** Autotune feature in CNC11
Moderator: cnckeith
**RESOLVED** Autotune feature in CNC11
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
Re: Autotune feature in CNC11
i too am having issues tuning manually and when i installed cnc 11 to tune with it says demo expired even though i just installed it
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Centroid_Tech
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: Autotune feature in CNC11
Did you guys enter the demo code to put the CNC11 software in demo mode? If you don't do that you cannot run autotune. if you didn't receive a demo code for the Centroid CNC11 software with your kit email tech@ajaxcnc.com and request one. Make sure you include your control serial number or system ID number.
Thanks,
Ajax_tech
Thanks,
Ajax_tech
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
(Note: Liking will "up vote" a post in the search results helping others find good information faster)