Quick Tip: Creating a Report.zip file

[martyscncgarage]

How to create a report.zip file

[rickwjenn]

Thanks for this video. I accidentally reset my CNC 12 Wizard Configuration and got the opportunity to "learn" and set up my machine the second time. I went much faster, but should of used the report restore.

Thx

[cj110109]

Hello, I have a question, and I haven't made any attempt to do it so a report wouldn't have any relevant information, I have an A/C Servo motor and driver for the spindle on my CNC machine, and I can't seem to find any information on how to connect it, I found the schematic for my clearpath motion system motors, but the spindle is a nema 56 3.6 hp A/C servo. Can someone give me a hand as I have the motion system all set, and this is the only thing left stopping me from being able to use the CNC machine again after switching boards.

[cnckeith]

Hello, I have a question, and I haven't made any attempt to do it so a report wouldn't have any relevant information, I have an A/C Servo motor and driver for the spindle on my CNC machine, and I can't seem to find any information on how to connect it, I found the schematic for my clearpath motion system motors, but the spindle is a nema 56 3.6 hp A/C servo. Can someone give me a hand as I have the motion system all set, and this is the only thing left stopping me from being able to use the CNC machine again after switching boards.

hi please start a fresh thread so we can help you.