All axis pause when jogging

[frankljs]

Hello, I recently finished an all in one DC retrofit to my tree mill. I’ve noticed that when jogging and fast or slow every axis will pause, or hesitate from time to time -it does not seem consistent. Can anybody point me in the right direction as to what may cause this.

[CentroidFrog]

A video of what is happening would go a log way to help us understand what is happening.
Please post a fresh report.
Here is how:

[frankljs]

For some reason the website wont allow to add the video. Says it won’t take a .mov from my iPhone. However i will post a vid on my build thread with link to google photo. I have a recent report posted on my thread. From like a week ago and I haven’t done any changes to it. I’ll try and post another one today when I get a chance.
. I posted a question about my servos getting hot a week ago. Which i still need help for. I’m not sure it’s related to this issue. But I will note that when running a program, it doesn’t pause or hesitate when moving at all. Only whenever I manually jogged it.

[frankljs]

Actually i forgot, the link to the photo album is at the bottom of my post.

[frankljs]

So just as a recap. If I jog the any axis with the vcp, it will move, then randomly pause, then continue on. All axis do this. Movement does not pause if a program is running. Video is in my photo album of x axis being jogged and problem presented.

Second issue is my servos are getting too hot. I used the recommended settings from the manual. I ran the auto tune and kept those settings at first. More details are in my build thread the last couple posts.

Thanks

[frankljs]

Any help here would be appreciated.