BIOS setup on the Dell Touch Screen All-in-One-CNCPC

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
PLData
Posts: 44
Joined: Sat Oct 14, 2017 2:10 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: many boards
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Denmark

BIOS setup on the Dell Touch Screen All-in-One-CNCPC

Post by PLData »

Hi Support,

Back in 2017 I bought a Dell Touch Screen All-in-One-CNCPC and the Acorn kit

The BIOS battery in the Dell computer is flat and I have changed to a new one, but I cannot get permission to change BIOS settings, I need to unlocked the BIOS with an administrator code

Can you please provide the administrator code, so I set can setup the BIOS ?

And rum my Acorn again.

\PLData


EthanC
Posts: 1
Joined: Mon Jan 17, 2022 10:07 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: BIOS setup on the Dell Touch Screen All-in-One-CNCPC

Post by EthanC »

The default BIOS password for computers purchased from Centroid is either

Code: Select all

159
or

Code: Select all

159gates
Hope that helps!


PLData
Posts: 44
Joined: Sat Oct 14, 2017 2:10 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: many boards
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Denmark

Re: BIOS setup on the Dell Touch Screen All-in-One-CNCPC

Post by PLData »

Hi EthanC,

Thanks for your support I gotit up and running again :-)

\PLData


cncsnw
Community Expert
Posts: 4584
Joined: Wed Mar 24, 2010 5:48 pm

Re: BIOS setup on the Dell Touch Screen All-in-One-CNCPC

Post by cncsnw »

As a followup: "159gates" was also used on Centroid Dell PC's from late 2019.


Post Reply