Dxf
Moderator: cnckeith
-
- Posts: 2112
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Dxf
That is because the conture is not closed, not all points are connected.
Uwe
Uwe
-
- Posts: 226
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Dxf
can you try with these new elements?
- Attachments
-
- pochemarthyremanche.cnc
- (7.51 KiB) Downloaded 6 times
-
- contourmanche_telecaster.dxf
- (19.92 KiB) Downloaded 9 times
-
- Posts: 226
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Dxf
I succeeded with the cnc12 v5.1 Offline Mill and mill Intercon except that my parameters were in inches once I changed to millimeters it no longer works
j'ai réussi avec le cnc12 v5.1 Offline Mill and mill Intercon sauf que mes paramètres était en pouce une fois passer en millimètre ca ne fonctionne plus
j'ai réussi avec le cnc12 v5.1 Offline Mill and mill Intercon sauf que mes paramètres était en pouce une fois passer en millimètre ca ne fonctionne plus
-
- Posts: 226
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Dxf
normally a dxf option is made to save time I use it every day when I work on itnc 530 never have so many problems
-
- Posts: 2112
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Dxf
I have no problems with dxf import, but this one is also not a closed contour.
To mill pockets, dxf must be closed around the pocket.
I use AutoCAD LT or Inkscape with no problems.
Uwe
To mill pockets, dxf must be closed around the pocket.
I use AutoCAD LT or Inkscape with no problems.
Uwe
-
- Posts: 226
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Dxf
I redid my dxf the outline it selects in one go without problem but it does not want to be interior
I just want to know how to do it with the dxf
here is attached my dxf in outline close can you try
j'ai refait mon dxf le contour ce sélectionne en une fois sans problème mais il ne veut pas faire intérieure
je veut juste savoir comment faire avec le dxf
voici en pièce jointe mon dxf en contour fermer pouvez vous essayer
- Attachments
-
- jbf.cnc
- (4.5 KiB) Downloaded 3 times
-
- contourmanche_telecaster.dxf
- (99.61 KiB) Downloaded 5 times
-
- Posts: 226
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Dxf
this is what I want to create with the dxf
voila ce que je veut créer avec le dxf
-
- Posts: 2112
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Dxf
Why do you want to import dxf if you have the model in fusion?
Postprocessor for Centroid in fusion is very good.
Uwe
Postprocessor for Centroid in fusion is very good.
Uwe
-
- Posts: 226
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Dxf
Mon but est d'utiliser un maximum intercom
C'est tellement simple d'utilisation
Imaginons que ma poche est trop petite
En deux temps trois mouvements j'ai modifié mes cotations
Et si j'ai pris cette carte cnc c'était pour option dxf
Je voudrais tellement que cela fonctionne
Pouvez vous regarder le fichier que je viens de poster ce matin
Je comprends pas où est erreur