Hi,
Finally made some progress on my upgrade. I got all the axis motors up and working and configured for the right directions.
However using the jog buttons on the MPG-6 sends the axis in the opposite direction to the ones on the VCP. i.e. correct on VCP but inverted on MPG. I can't find any information on configuring the MPG on the web.
Thanks,
Neil
WMPG-6 jogs in reverse direction <parameter set incorrectly>
Moderator: cnckeith
-
- Posts: 16
- Joined: Sun Dec 24, 2023 12:54 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: WMPG-6 jogs in reverse direction
I will get a report to upload, but this is on an Allin1DC board with the latest version of CNC12 running.
Initially I thought it might be related to having to reverse the motor direction on X and Z as I had not got the Y motor back in. Now I have it is the same on the Y with the motor in the normal direction. On VCP the jog + moves the axis in the positive direction but on the WMPG the jog + button moves the axis in the negative direction.
Initially I thought it might be related to having to reverse the motor direction on X and Z as I had not got the Y motor back in. Now I have it is the same on the Y with the motor in the normal direction. On VCP the jog + moves the axis in the positive direction but on the WMPG the jog + button moves the axis in the negative direction.
-
- Posts: 3144
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: WMPG-6 jogs in reverse direction
You might have a look at parameter 1.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Re: WMPG-6 jogs in reverse direction
More likely Parameter 411.
-
- Posts: 16
- Joined: Sun Dec 24, 2023 12:54 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: WMPG-6 jogs in reverse direction - resolved
many thanks,
It was Parameter 411 set incorrectly
It was Parameter 411 set incorrectly