Centroid Community CNC Support Forum

Has anything changed (DMM) here? Are the any other servo manufacturers in the line to work with Hickory?
John

Excellent. When I can get to the other one they'll come in together.
John

I have several Fanuc servos I would like to use. I reviewed the Centroid Fanuc chart and these were not listed. Any idea if they might be compatible?
John

That's a bummer. I was interested in installing them on a small precision lathe I'm designing. Originally installed on a robotic arm.
John

Any help would be appreciated.
John

I already own a allinonedc and acorn control machines and I'm starting a new project. The subject titled Fanuc is what I'm wanting to use. I looked in the Centroid Fanuc retrofit manual but I don't see this specific one mentioned. Since it is smaller than the more traditional red caps I wanted to ...

Got it going now!!! First, I changed parameter 35 to 0 and 313 to 0. The spindle doesn't have an encoder. Second, I jumped the lube pump input and that was ok. I really appreciate you taking the time to lay out the events, errors, and flow so that it was more apparent to me how to proceed. By no ...

Here you go

When researching a problem where you're unable to clear a fault, and the fault is a configuration problem, which files in the backup zip should be looked at first, assuming the electrical components are all fine. Something along the lines of either a plc configuration problem or parameter problem.

Yep, just did it.
John