Centroid Community CNC Support Forum

I have upgraded the spindle to a Huan Yang 2.2Kw water cooled spindle.
I have wired the Huan Yang VFD to the Acorn_rev4, Huan Yang VFd drawing S14984.DWG.
I have set inputs and outputs as per table at the top of the aforementioned drawing.
I have set max spindle speed to 24000 and min spindle speed ...

thanks all especially #nigelo ... sorted.
Occasionally us old gits need a prod!!
Many thanks.

brain fog has set in ...
CNC router .... 'park' does it business.
Next start .... homing cycle does it thing - all OK
I have physically 141mm of travel on the Z axis. I have set this in homing and travel limits for the Z axis.
When I home out all axis after power up machine co-ords show 0.0000 on ...

#centroid467
thank you very much - that worked, proper job!!

Hi,
Attached pic of page from AMB - this is explicit as it gets!!

I am attempting to install AMB Elektrik 1050 FME-1 DI spindle on CNC router.
Using OUTPUT 1 Set as SpinFWD
Wired 3 core interface cable to spindle as:- BROWN to an independent 24V Supply - GREEN to AN-OUT 0-10V DC on Acorn board – WHITE to 0V GND AN-GROUND on Acorn board.
On MDI command M3 S25000 ...

should be park.mac of course ... went continental!!!!

in wizard CNC12 V5 'users of routers will probably wish to edit park macro' - use yellow button to edit park macro and it opens - see pic attached