I have upgraded the spindle to a Huan Yang 2.2Kw water cooled spindle.
I have wired the Huan Yang VFD to the Acorn_rev4, Huan Yang VFd drawing S14984.DWG.
I have set inputs and outputs as per table at the top of the aforementioned drawing.
I have set max spindle speed to 24000 and min spindle speed to 15000.
I have set parameters PD 001 and PD002 to '1' within VFD. Also PD144 to '24000'.
Acorn communicates with CNC12 but I get 9030 SPINDLE Fault!
What have I overlooked ... help would be much appreciated ... my brain is beginning to hurt!!
Huan Yang VFD
Moderator: cnckeith
-
scarab
- Posts: 8
- Joined: Thu Jul 21, 2022 9:33 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 98F07B03B5A7-0513226213
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Devon, UK
Huan Yang VFD
(Note: Liking will "up vote" a post in the search results helping others find good information faster)