ALLIN1DC 160v to 180v conversion?
Moderator: cnckeith
-
- Posts: 105
- Joined: Mon Jan 03, 2011 11:54 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: A900171
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
ALLIN1DC 160v to 180v conversion?
What difference is there between the early (160 volt max) ALLIN1 boards vs. the later (180 volt max) boards other than the 3 large capacitors close to the servo motor terminals?
Dean Jahnz
Cannon River Machine
Cannon River Machine
-
- Posts: 286
- Joined: Thu Mar 18, 2010 2:24 pm
Re: ALLIN1DC 160v to 180v conversion?
The higher voltage capacitors is the only difference. All of the other components on the ALLIN1DCs already could handle the higher voltages.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..
If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.
Without the above information we may not be able to help and/or reply until the required information is posted..