Setting up the monitor properties

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
csabel8539
Posts: 6
Joined: Wed Nov 16, 2022 8:12 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: A901150
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Setting up the monitor properties

Post by csabel8539 »

Hi,

Is there any documentation on setting up the monitor to display properly?

I can’t see everything…..

Thanks in advance

Top
cnckeith
Site Admin
Posts: 9025
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Setting up the monitor properties

Post by cnckeith »

use 1920x1080 if you are using the VCP.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”