Centroid Community CNC Support Forum

Hello everyone,
I'm about 94% done with my retrofit and I wanted to make some Schematics specific to this machine to have in the control box. I was looking for one but didnt see anything. Id just want to have a picture of the Acorn and have blank I could fill in as to what is actually connected to each slot. Would be even cooler if it was a fillable PDF kind of thing, but just a printable sheet I could hand write into would be great too. Does one exist already? If one doesn't exist could one be made and added to the Schematics page?

Thanks for reading

If you download the Acorn schematic files there's a DWG folder in there that has the actual CAD drawing for the schematics. You could open the "Basic Power and Communications, Bench Test" DWG schematic CAD file in your favorite CAD program and edit it yourself.

all DIY schematics are located here.
https://www.centroidcnc.com/centroid_di ... browse.php

two versions of every schematic are provided. a PDF and a .dwg the .dwg on on the left. see circled below.

ShawnM wrote: ↑Sat Jan 15, 2022 9:38 pm If you download the Acorn schematic files there's a DWG folder in there that has the actual CAD drawing for the schematics. You could open the "Basic Power and Communications, Bench Test" DWG schematic CAD file in your favorite CAD program and edit it yourself.

thanks.,
fyi...
the folder download has been discontinued in favor of a dynamic (updated all the time) searchable diy schematics web page. here is the link.
https://www.centroidcnc.com/centroid_di ... browse.php

if there are any old schematics zip file downloads still floating around..they contain old files please don't use those and always go to the new web page to download the latest and greatest. https://www.centroidcnc.com/centroid_di ... browse.php