Page 1 of 1
leadshine etherCAT schematics
Posted: Thu May 27, 2021 10:11 pm
by weaven
I am interested in some schematics for the leadshine etherCAT system, servo motor set-up for use on my acorn cnc conversion, is there any schematics, or interest in making one. Would like to try this system, seems like a nice set up, from Automation technologies
Re: leadshine etherCAT schematics
Posted: Thu May 27, 2021 11:32 pm
by Gary Campbell
EtherCat is not compatible with Acorn. You will need to wait for Hickory to be released
Re: leadshine etherCAT schematics
Posted: Fri May 28, 2021 2:13 am
by Black Forest
Is there any end in sight for the Hickory's release? Keith?
Re: leadshine etherCAT schematics
Posted: Fri May 28, 2021 10:29 am
by cnckeith
marty is beta testing for us and we have a machining center running the shop making parts now.. soon.
Re: leadshine etherCAT schematics
Posted: Sun May 30, 2021 5:07 pm
by martyscncgarage
cnckeith wrote: ↑Fri May 28, 2021 10:29 am
marty is beta testing for us and we have a machining center running the shop making parts now.. soon.
Keith likes popping off about new stuff!
My Atrump Maximill is getting close....
Also explains why I haven't been on the forums as much.