GSK servo driver with GPIO4D
Posted: Sun Dec 16, 2012 2:07 pm
Hello ,
We have a serious problem with gsk servo driver , first for activating the enable of servo driver with GPIO4D board we need at least 12 v and the board give only 5v and if we activate the enable on the servo driver we have feedback from encoder without motion it is very difficult so we have think about activating the enable with relay situated on the GPIO4D board and we don't know how we will do that please we need urgent help for and thank you very much.
We have a serious problem with gsk servo driver , first for activating the enable of servo driver with GPIO4D board we need at least 12 v and the board give only 5v and if we activate the enable on the servo driver we have feedback from encoder without motion it is very difficult so we have think about activating the enable with relay situated on the GPIO4D board and we don't know how we will do that please we need urgent help for and thank you very much.