I ordered and received a KP-3 probe this past week. I haven't installed yet. I downloaded the latest wiring drawings that are fresh today 11-21 and same probe with the same part number has 4 wires. The probe that i received has 3 wires. Help the poor boy out please. Thanks.
John
KP-3 Probe
Moderator: cnckeith
-
swissi
- Posts: 405
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
Re: KP-3 Probe
Not sure what you downloaded but this schematics here shows 3 wires:n2xd wrote: ↑Sat Nov 21, 2020 5:48 pm I ordered and received a KP-3 probe this past week. I haven't installed yet. I downloaded the latest wiring drawings that are fresh today 11-21 and same probe with the same part number has 4 wires. The probe that i received has 3 wires. Help the poor boy out please. Thanks.
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
cnckeith
- Posts: 2993
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: KP-3 Probe
please refer to the KP- 3 manual, download the latest version here.
https://www.centroidcnc.com/centroid_di ... _probe.pdf
https://www.centroidcnc.com/centroid_di ... _probe.pdf
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)