Page 1 of 1

New retrofit Success Acorn and DMM

Posted: Fri Apr 03, 2020 6:19 pm
by TheKitMill
Attached are some pictures of the latest Router retrofit
6X12 " DMM Servos Acorn Control with pro license. 5HP Water cooled Spindle

Shown are first test cuts and some parts total Time start to finish about 4 1/2 days. Done on customers location. Machine is up running making parts.

I used the CNC4PC C86 Connector Board for Acorn to DMM While it was not without a few setup issues once I got everything set correctly it worked great. It use just one cat 5 wire from Acorn to DMM I will post pictures of the set up next week. Arturo was great and I want to thank Marty for his help figuring out some problems.

The individual letter were the first parts cut out on the machine and they came out great.
If anyone has any question please PM me or post on the Thread

Re: New retrofit Success Acorn and DMM

Posted: Wed Apr 15, 2020 3:01 pm
by cnckeith
cool! thanks for posting!