Page 1 of 3
**RESOLVED** CNC11 update
Posted: Thu Apr 08, 2010 3:16 pm
by converterking
I have a MPU11-DC3IOB control running CNC11 rev34 software. When I try to upgrade to the latest software the pendant stops working. What am I doing wrong? thanks, Terry
Re: CNC11 update
Posted: Mon Apr 12, 2010 8:31 am
by diycncscott
Hi Terry,
Some of the pendant keys were re-mapped after you received you kit. This is fixed in a PLC program update which I'm testing this morning. -Look for a new topic this afternoon titled "Current MPU11 PLC Programs For CNC11". I will also have updated CNC11 software posted shortly
Re: CNC11 update
Posted: Tue Apr 13, 2010 11:09 am
by converterking
Would I be better off getting a new pendant?
Re: CNC11 update
Posted: Thu Apr 15, 2010 1:42 pm
by converterking
Any updates?
Re: CNC11 update
Posted: Fri Apr 16, 2010 12:18 pm
by cncsnw
You don't need a new pendant; that did not change at all. Instead, the internal numbers assigned to the pendant keys and LEDs in the PLC program (the JPI and JPO definitions) all changed. Instead of jumping all around based on function, the numbers are now assigned in order, row by column.
The following lines could be an approximate replacement for the JPI and JPO definitions in your current PLC program. Likely there will be some minor spelling and style differences that you will need to edit in.
Code: Select all
SpindlePlusKey IS JPI1 ; Row 1 Column 1
SpindleAutoManualKey IS JPI2 ; Row 1 Column 2
Aux1Key IS JPI3 ; Row 1 Column 3
Aux2Key IS JPI4 ; Row 1 Column 4
Aux3Key IS JPI5 ; Row 1 Column 5
Spindle100PercentKey IS JPI6 ; Row 2 Column 1
SpindleCWKey IS JPI7 ; Row 2 Column 2
Aux4Key IS JPI8 ; Row 2 Column 3
Aux5Key IS JPI9 ; Row 2 Column 4
Aux6Key IS JPI10 ; Row 2 Column 5
SpindleMinusKey IS JPI11 ; Row 3 Column 1
SpindleCCWKey IS JPI12 ; Row 3 Column 2
Aux7Key IS JPI13 ; Row 3 Column 3
Aux8Key IS JPI14 ; Row 3 Column 4
Aux9Key IS JPI15 ; Row 3 Column 5
SpindleStopKey IS JPI16 ; Row 4 Column 1
SpindleStartKey IS JPI17 ; Row 4 Column 2
UnusedR4C3Key IS JPI18 ; Row 4 Column 3
UnusedR4C4Key IS JPI19 ; Row 4 Column 4
UnusedR4C5Key IS JPI20 ; Row 4 Column 5
CoolantAutoManualKey IS JPI21 ; Row 5 Column 1
CoolantFloodKey IS JPI22 ; Row 5 Column 2
CoolantMistKey IS JPI23 ; Row 5 Column 3
Aux11Key IS JPI24 ; Row 5 Column 4
UnusedR5C5Key IS JPI25 ; Row 5 Column 5
IncrContKey IS JPI26 ; Row 6 Column 1
x1JogKey IS JPI27 ; Row 6 Column 2
x10JogKey IS JPI28 ; Row 6 Column 3
x100JogKey IS JPI29 ; Row 6 Column 4
MPGKey IS JPI30 ; Row 6 Column 5
Ax4PlusJogKey IS JPI31 ; Row 7 Column 1
UnusedR7C2Key IS JPI32 ; Row 7 Column 2
Ax2PlusJogKey IS JPI33 ; Row 7 Column 3
UnusedR7C4Key IS JPI34 ; Row 7 Column 4
Ax3PlusJogKey IS JPI35 ; Row 7 Column 5
UnusedR8C1Key IS JPI36 ; Row 8 Column 1
Ax1MinusJogKey IS JPI37 ; Row 8 Column 2
FastSlowKey IS JPI38 ; Row 8 Column 3
Ax1PlusJogKey IS JPI39 ; Row 8 Column 4
UnusedR8C5Key IS JPI40 ; Row 8 Column 5
Ax4MinusJogKey IS JPI41 ; Row 9 Column 1
UnusedR9C2Key IS JPI42 ; Row 9 Column 2
Ax2MinusJogKey IS JPI43 ; Row 9 Column 3
UnusedR9C4Key IS JPI44 ; Row 9 Column 4
Ax3MinusJogKey IS JPI45 ; Row 9 Column 5
CycleCancelKey IS JPI46 ; Row 10 Column 1
SingleBlockKey IS JPI47 ; Row 10 Column 2
ToolCheckKey IS JPI48 ; Row 10 Column 3
FeedHoldKey IS JPI49 ; Row 10 Column 4
CycleStartKey IS JPI50 ; Row 10 Column 5
SpindlePlusLED IS JPO1 ; Row 1 Column 1
SpindleAutoManualLED IS JPO2 ; Row 1 Column 2
Aux1LED IS JPO3 ; Row 1 Column 3
Aux2LED IS JPO4 ; Row 1 Column 4
Aux3LED IS JPO5 ; Row 1 Column 5
Spindle100PercentLED IS JPO6 ; Row 2 Column 1
SpindleCWLED IS JPO7 ; Row 2 Column 2
Aux4LED IS JPO8 ; Row 2 Column 3
Aux5LED IS JPO9 ; Row 2 Column 4
Aux6LED IS JPO10 ; Row 2 Column 5
SpindleMinusLED IS JPO11 ; Row 3 Column 1
SpindleCCWLED IS JPO12 ; Row 3 Column 2
Aux7LED IS JPO13 ; Row 3 Column 3
Aux8LED IS JPO14 ; Row 3 Column 4
Aux9LED IS JPO15 ; Row 3 Column 5
SpindleStopLED IS JPO16 ; Row 4 Column 1
SpindleStartLED IS JPO17 ; Row 4 Column 2
UnusedR4C3LED IS JPO18 ; Row 4 Column 3
UnusedR4C4LED IS JPO19 ; Row 4 Column 4
UnusedR4C5LED IS JPO20 ; Row 4 Column 5
CoolantAutoManualLED IS JPO21 ; Row 5 Column 1
CoolantFloodLED IS JPO22 ; Row 5 Column 2
CoolantMistLED IS JPO23 ; Row 5 Column 3
Aux11LED IS JPO24 ; Row 5 Column 4
UnusedR5C5LED IS JPO25 ; Row 5 Column 5
IncrContLED IS JPO26 ; Row 6 Column 1
x1JogLED IS JPO27 ; Row 6 Column 2
x10JogLED IS JPO28 ; Row 6 Column 3
x100JogLED IS JPO29 ; Row 6 Column 4
MPGLED IS JPO30 ; Row 6 Column 5
Ax4PlusJogLED IS JPO31 ; Row 7 Column 1
UnusedR7C2LED IS JPO32 ; Row 7 Column 2
Ax2PlusJogLED IS JPO33 ; Row 7 Column 3
UnusedR7C4LED IS JPO34 ; Row 7 Column 4
Ax3PlusJogLED IS JPO35 ; Row 7 Column 5
UnusedR8C1LED IS JPO36 ; Row 8 Column 1
Ax1MinusJogLED IS JPO37 ; Row 8 Column 2
FastSlowLED IS JPO38 ; Row 8 Column 3
Ax1PlusJogLED IS JPO39 ; Row 8 Column 4
UnusedR8C5LED IS JPO40 ; Row 8 Column 5
Ax4MinusJogLED IS JPO41 ; Row 9 Column 1
UnusedR9C2LED IS JPO42 ; Row 9 Column 2
Ax2MinusJogLED IS JPO43 ; Row 9 Column 3
UnusedR9C4LED IS JPO44 ; Row 9 Column 4
Ax3MinusJogLED IS JPO45 ; Row 9 Column 5
CycleCancelLED IS JPO46 ; Row 10 Column 1
SingleBlockLED IS JPO47 ; Row 10 Column 2
ToolCheckLED IS JPO50 ; Row 10 Column 3
FeedHoldLED IS JPO48 ; Row 10 Column 4
CycleStartLED IS JPO49 ; Row 10 Column 5
Hope this helps until Ajax gets around to posting some updated programs.
You may also find that you need to reduce the Kd gains in the PID Configuration screen, perhaps to around 25% of what they were before.
Re: CNC11 update
Posted: Wed May 05, 2010 9:12 am
by converterking
Any update?
Re: CNC11 update
Posted: Fri May 21, 2010 1:03 pm
by converterking
I installed the new update from rev34 but didnt update the plc. Now the pendant doesnt work.
Re: CNC11 update
Posted: Fri May 21, 2010 3:30 pm
by diycncscott
Terry,
Please install the latest software and copy the PLC program to your install directory which should clear up any problems you were having. Please do not run the PLCInstaller or you overwrite your existing config files again.
Use these links
PLC
http://ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=64
Software
http://ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=63
ajaxscott
Re: CNC11 update
Posted: Mon May 24, 2010 8:03 am
by converterking
I installed the plc program per your instructions. The machine jogs in all directions except for y- and you cannot get it off slow jog. It homed and ran autotune without any problems. You cant use manual spindle spindle control either. I than ran the machine from version 3.0 r34 and everything worked. Terry
Re: CNC11 update
Posted: Mon May 24, 2010 9:46 am
by diycncscott
Terry,
Please send a report while running v3.01 r.003
Th newer PLC has some functionality that can force slow jog and disable jogging in a direction if certain conditions are met. We probably just need to clear those conditions - I'm sure you powered everything off after updating as instructed correct? (not just restarted the software)?
Also, press alt-i to bring up the I/O display and use the F11 & F12 keys to page down to view inouts 769-783
What color are each of the above inputs?