Page 1 of 1
All in One update ?
Posted: Sat Mar 02, 2019 7:33 am
by dasme
I just got Internet down to the building where my Supermax cnc is after more than three years.Does the all in one need updated ? if yes then how ?
Re: All in One update ?
Posted: Sun Mar 03, 2019 9:33 am
by martyscncgarage
Does the machine do what you want it to do? If so, not necessarily. You should post a report.
Marty
Re: All in One update ?
Posted: Tue Mar 05, 2019 10:48 am
by dasme
martyscncgarage wrote: ↑Sun Mar 03, 2019 9:33 am
Does the machine do what you want it to do? If so, not necessarily. You should post a report.
Marty
I need to run machine more and get more familiar with it to develop some uses . What would a report tell you ?
Re: All in One update ?
Posted: Tue Mar 05, 2019 11:12 am
by Gary Campbell
dasme wrote: ↑Tue Mar 05, 2019 10:48 am
What would a report tell you ?
Everything
Re: All in One update ?
Posted: Sun Mar 24, 2019 1:49 pm
by martyscncgarage
dasme wrote: ↑Tue Mar 05, 2019 10:48 am
martyscncgarage wrote: ↑Sun Mar 03, 2019 9:33 am
Does the machine do what you want it to do? If so, not necessarily. You should post a report.
Marty
I need to run machine more and get more familiar with it to develop some uses . What would a report tell you ?
It contains all the machine.parameters and logs.
Go to YouTube and search Centroid Mill Training, will give you a good jump start on the control
Re: All in One update ?
Posted: Fri Mar 29, 2019 10:49 am
by countryguy
I'll add a little color to the exchange here. I also just popped on to see about a latest and greatest DC-AIO w/ touchscreen....
As a end user; I did a DC-AIO install on my Supermax YMC-30. about 3 or 4 years ago as well. Last year, I contacted support and asked the same type of Q. That original install version was out of date by a few years. There were multiple bug-fixes, and I think some performance stuff. Anyway, I was sent an upgrade instruction set and a download file. The process was easy enough. you must make sure you have your backups (at least I urge you to make a full backup of their app folder(s)). Do their process to the letter and call if something does not match up on the sheet, to your screen. (I recall I needed to do that). And tada' upgraded Centroid to latest and greatest.
Love the software and the system overall.
Re: All in One update ?
Posted: Fri Mar 29, 2019 12:36 pm
by martyscncgarage
countryguy wrote: ↑Fri Mar 29, 2019 10:49 am
I'll add a little color to the exchange here. I also just popped on to see about a latest and greatest DC-AIO w/ touchscreen....
As a end user; I did a DC-AIO install on my Supermax YMC-30. about 3 or 4 years ago as well. Last year, I contacted support and asked the same type of Q. That original install version was out of date by a few years. There were multiple bug-fixes, and I think some performance stuff. Anyway, I was sent an upgrade instruction set and a download file. The process was easy enough. you must make sure you have your backups (at least I urge you to make a full backup of their app folder(s)). Do their process to the letter and call if something does not match up on the sheet, to your screen. (I recall I needed to do that). And tada' upgraded Centroid to latest and greatest.
Love the software and the system overall.
Thanks for the feedback that all went ok and for the reinforcement of doing back ups, reports, save them OFF the CNCPC....can't stress that enough.
Marty