Summing Scale Inputs
Posted: Thu Nov 22, 2018 7:00 pm
Is it possible to have two scales on an axis and combine them? I.e. a glass scale on a mill quill used for positioning feedback on that axis (Z) and a glass scale on the non-motorized knee acting as a W axis being combined so that moving the knee up or down changes the Z axis position on the DRO.
If that is possible, do both scales have to be the same resolution, or can the quill be 1um and the knee scale be 5um?
If that is possible, do both scales have to be the same resolution, or can the quill be 1um and the knee scale be 5um?