CENTROID CNC Mill Training (Applies to Routers)
Posted: Sat Sep 15, 2018 8:53 am
These are VERY GOOD videos that Keith produced.
Goes over machine start up, Axis motion as well as Tool library setup and part setup, and an example using Intercon:
BED MILL (Applies to routers mostly as well)
https://youtu.be/mA41pUyONJM
KNEE MILL
https://youtu.be/iJcq_G8yRdc
Goes over machine start up, Axis motion as well as Tool library setup and part setup, and an example using Intercon:
BED MILL (Applies to routers mostly as well)
https://youtu.be/mA41pUyONJM
KNEE MILL
https://youtu.be/iJcq_G8yRdc