Centroid Community CNC Support Forum

Posted: **Sun Sep 16, 2018 3:27 pm**

This post is intended for Username: Centroid_Liviu

Last time I posted something about not be able to send pictures thru the forum you intended to fix the issues but as you can see on the attached word document, the issue has not been resolved.

Please do something about this or if you cannot then configure the forum so that this function is not even shown as available.

I have taken a picture of this posting to -if necessary, demonstrate that I posted it in case it "disappears".

Thank you,
Arturo Martinez

Posted: **Mon Sep 17, 2018 7:57 am**

hello. if you have trouble with images or attaching docs to the post, please use Google Photos and/or Google Drive and place a link to the images/docs in the post.

fyi.. here are the forum attachment settings/rules.

Posted: **Mon Sep 17, 2018 8:09 am**

Arturo Martinez wrote: ↑Sun Sep 16, 2018 3:27 pm This post is intended for Username: Centroid_Liviu

Last time I posted something about not be able to send pictures thru the forum you intended to fix the issues but as you can see on the attached word document, the issue has not been resolved.

Please do something about this or if you cannot then configure the forum so that this function is not even shown as available.

I have taken a picture of this posting to -if necessary, demonstrate that I posted it in case it "disappears".

Thank you,
Arturo Martinez

There is a limit of 10 uploaded files per post. I count at least 11 in your screenshot. Please remove one or as Keith suggested use some sort of web-drive and just post the link here if that is easier.

Centroid Community CNC Support Forum

Error sending pictures thru the Forum

Error sending pictures thru the Forum

Re: Error sending pictures thru the Forum

Re: Error sending pictures thru the Forum