Page 1 of 1
**RESOLVED** Autotune feature in CNC11
Posted: Mon Sep 27, 2010 10:47 am
by dawizard
Can I use the autotune feature in cnc11 to tune my motors for use with mach 3. I tried with the demo version but it doesn't work.
I'm having trouble getting the motors tuned . It's the last thing I need to make the machine operational.
Re: Autotune feature in CNC11
Posted: Sat May 07, 2011 7:33 pm
by pwborst
i too am having issues tuning manually and when i installed cnc 11 to tune with it says demo expired even though i just installed it
Re: Autotune feature in CNC11
Posted: Fri May 13, 2011 1:47 pm
by Centroid_Tech
Did you guys enter the demo code to put the CNC11 software in demo mode? If you don't do that you cannot run autotune. if you didn't receive a demo code for the Centroid CNC11 software with your kit email
tech@ajaxcnc.com and request one. Make sure you include your control serial number or system ID number.
Thanks,
Ajax_tech