Page 1 of 1
x axis positioning erro
Posted: Fri Aug 13, 2010 3:54 pm
by Ajax
My BP conversion has been working fairlt well.
However, today when I started the machine, after clicking the reset button I constintly am getting an "X axis positioning erro"
Can anyone help.
Thanks,
Alex
Re: x axis positioning error
Posted: Fri Aug 13, 2010 3:56 pm
by Ajax
Sorry for the typos.
My BP conversion has been working fairly well.
However, today when I started the machine, after clicking the reset button I am constantly getting an "X axis positioning error"
Can anyone help.
Thanks,
Alex
Posts: 4
Joined: Thu Apr 01, 2010 7:26 am
Private message
Re: x axis positioning erro
Posted: Sat Aug 14, 2010 11:57 am
by rppman
I would reboot the operation system and see if that corrects the problem being it worked fine before.
Re: x axis positioning erro
Posted: Mon Aug 16, 2010 12:14 pm
by diycncscott
Do you hear your Estop contactor pulling in when you release Estop?
If so, do you have ~120VDC at VM+ & VM- on the DC3IOB?
Go into the diagnostics screen, are any of the limits or emergency lit?