Centroid Community CNC Support Forum

Posted: **Mon Jun 16, 2025 6:59 pm**

Gentlemen:
How much current am I allowed to draw from the 12 volt supply on the probe connector in my Allin1DC?
Can I have 75ma? Max current? I want to install a wireless probe I bought. I hope to not have a separate power supply..
I called Scott Bennett some days ago. He said he would find out and send an email. Haven't heard since...

Posted: **Mon Jun 16, 2025 8:50 pm**

I believe it's fused at 2A.

Posted: **Mon Jun 16, 2025 9:09 pm**

What kind of fuse? is it a glass cartridge?
Where can I find a picture of the Allin!DC with the fuse showing?
I want to be very certain of the rating!!!

Posted: **Mon Jun 16, 2025 9:42 pm**

I Found it on a photograph I made during construction Its a miniature glass cartridge 2 A
Thanks, everyone

Posted: **Tue Jun 17, 2025 12:23 am**

For what it's worth, the 12V output of the MeanWell RQ-65D that typically powers an Allin1DC unit is rated 1.5A.

You should be fine drawing 75mA in any case.

Centroid Community CNC Support Forum

Current rating of 12 v supply on probe connector of Allin1DC

Current rating of 12 v supply on probe connector of Allin1DC

Re: Current rating of 12 v supply on probe connector of Allin1DC

Re: Current rating of 12 v supply on probe connector of Allin1DC

Re: Current rating of 12 v supply on probe connector of Allin1DC

Re: Current rating of 12 v supply on probe connector of Allin1DC