Page 1 of 1
Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Mon May 05, 2025 7:13 pm
by Aplus
How do you enable the Rapid Override and Link/Unlink with an Allin1Dc controller. I have the VCP figured out I think, at least it looks good but the rapid never changes. The feed override works well. I just can't figure the rapid out. I have read to select it in wizard VCP preferences but I don't have a wizard. I have referenced P51 in the VCP manual to get the buttons to work but the rates don't change.
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Tue May 06, 2025 4:03 pm
by CentroidFrog
I believe you're looking for Parameter 264:
https://www.centroidcnc.com/centroid_di ... f#page=362
It doesn't say in the manual, but adding 4 to P264 enables the Rapid Feed Link.
(I've marked this down to be fixed)
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Tue May 06, 2025 6:54 pm
by Aplus
I have tried 1 thru 7 in p264. It still does not work. I am by far not a PLC expert however I don't see any logic in there for rapid override. I would think it would be similar to feed override logic.
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Tue May 06, 2025 8:36 pm
by tblough
You haven't included a report so we don't know what version you are running. You need to be on the latest version, with the latest PLC program to have separate rapid feed override. This was a recent addition.
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Wed May 07, 2025 11:20 am
by Aplus
See report
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Mon May 12, 2025 6:05 pm
by Aplus
I tried to upgrade to CNC12 V5.30 and use the PLC program Centroid_ALLIN1DC_Mill_BP-Boss-r7.src. I now will get a F7 "Link on" button while homing.If I click on it before the homing sequence is finished, The Feedrate and Rapidrate will highlight on the screen (A different shade of blue) like "Link" was turned on. I don't see a button to turn it off or unlink. There is also a F7 "Link On" button along the bottom of the MDI screen. I'm still not seeing the rates changing for Rapid override. I have added a new report.
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Wed May 14, 2025 1:53 pm
by Centroid_Liviu
Currently that feature is not the ALLIN1DC PLC Programs including in the BP Boss PLC Program.
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Wed May 14, 2025 5:09 pm
by Aplus
Will it be in the next version?
Re: Enable the Rapid Override and Link/Unlink with Feed Override
Posted: Thu May 15, 2025 8:43 am
by cnckeith
Aplus wrote: ↑Wed May 14, 2025 5:09 pm
Will it be in the next version?
yes.
you can add it yourself for the v5.30 PLC program or wait till next version.
Related. USB-BOB gets you dedicated Rapid and Feedrate knobs as well.
https://shopcentroidcnc.com/shop/cnc-ac ... rol_panel/