Drive Fault on all drives (Resolved)

All things related to the Centroid CNC Plasma systems, Hardware and Software.

Moderators: cnckeith, Joey

Post Reply
Adam Saucier
Posts: 26
Joined: Fri Jan 24, 2025 5:30 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: Yes
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Drive Fault on all drives - RESOLVED

Post by Adam Saucier »

dovrosenberg wrote: ↑Fri May 09, 2025 8:29 am I resolved the issues I was having. I moved the wiring from the 24V screw terminals to the DB25 5V and removed the ENA+ and ENA- from my CL86T and CL57T stepper drives. I had to switch the drives from 24V (factory default setting) to 5V using the S3 switch next to the DIP switches. Even though the I had the latest version of the drivers that the docs say fully support 24V, 1 of the 3 CL86T drivers actually worked at 24v properly as expected. 1 seemed to have gotten fried. When I switched to 5v, the one driver that wasnt working started. The CL57T driver was totally non functional at 24V even with the switch set to 24v from the factory. I changed it over to 5V and now it is working. Someone on another Facebook group, said he was using CL86Y and CL57Y drivers at 24V with no problem
Awesome!!

Top
Post Reply

Return to “CNC Plasma”