Page 1 of 1
Connector for non Centroid Probe
Posted: Tue Feb 18, 2025 10:17 pm
by lavrgs
Centroid makes a cable with connectors on both ends SKU: 11211 it will attach to ALLIN1DC on one end and the connector on the other end
mates to a connector that I'm trouble finding - represented by the red rectangle
Re: Connector for non Centroid Probe
Posted: Wed Feb 19, 2025 9:10 am
by RTech
That's an AMP CPC connector. You can get them from Digikey, Mouser, Newark...etc.
Re: Connector for non Centroid Probe
Posted: Wed Feb 19, 2025 10:46 am
by centroid467
Yep, AMP CPC Series 2 in size 11-8.
This is the housing:
https://www.mouser.com/ProductDetail/TE ... SVrQ%3D%3D
This page lists the housings and contacts. You'll want to pick
pin contacts from the list on the bottom of the left-hand side of the page:
https://www.mouser.com/catalog/english/101/1289.pdf
This part is a suitable backshell:
https://www.mouser.com/ProductDetail/TE ... BzNA%3D%3D