Page 1 of 1
CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, Drill
Posted: Thu Nov 21, 2024 6:09 pm
by cnckeith
starting a fresh thread specifically for CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, Drill Bank, Laser and more.
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Fri Nov 22, 2024 1:58 pm
by corbin
Awesome! The "Measurement Option" is a nice feature.
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Fri Nov 22, 2024 5:17 pm
by cnckeith
adding G152 and G143 in place of G52.2.3.4. etc
added new Wizard tool measurement method decision screen
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Fri Nov 22, 2024 11:12 pm
by suntravel
Hi Keith,
good Idea with the new wizard page.
I would also mention my preferred method there with P43=1 because this way on a VMC type mill or router G54 Z 0 is the top surface from the machining table.
Uwe
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Tue Nov 26, 2024 2:33 pm
by cnckeith
suntravel wrote: ↑Fri Nov 22, 2024 11:12 pm
Hi Keith,
good Idea with the new wizard page.
I would also mention my preferred method there with P43=1 because this way on a VMC type mill or router G54 Z 0 is the top surface from the machining table.
Uwe
yeah! thats on the next page, one step at a time
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Tue Nov 26, 2024 5:26 pm
by cncsnw
Tangentially related: will the new tool library -- whatever it ends up looking like -- be accessible and browsable from within an Intercon F4/Tool Change operation?
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Tue Nov 26, 2024 5:39 pm
by cnckeith
cncsnw wrote: ↑Tue Nov 26, 2024 5:26 pm
Tangentially related: will the new tool library -- whatever it ends up looking like -- be accessible and browsable from within an Intercon F4/Tool Change operation?
yes.
Re: CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, D
Posted: Thu Jan 30, 2025 11:19 pm
by RogDC
Will the ATC initialization page text be updated based on the tool touch off decision/settings page?
Can the TT be configured to use a moveable touch plate in a fixed location, for example the Avid Plate placed in a fixed holder on the table @ g30 P3?