Page 1 of 1
Feed Rate
Posted: Wed Oct 23, 2024 11:18 pm
by JWH
I built a diy cnc router and have everything working properly. No matter how much I change the "F" gcode setting on a job the feed rate is extremely slow. Exactly what controls the job feed speed rate with the acron12 router control software. As an 80 year old here I need the answer to be straight to the question.
Re: Feed Rate
Posted: Thu Oct 24, 2024 1:32 am
by suntravel
There is no short answer because the problem could have many root causes.
pls. post a report, so we can help you.
Uwe
Re: Feed Rate
Posted: Thu Oct 24, 2024 6:50 am
by tblough
And a copy of the g-code file giving you problems.
Re: Feed Rate
Posted: Thu Oct 24, 2024 2:19 pm
by JWH
It appears the feed over ride was not correctly set so now the feed speed can be changed within the g-code.
Re: Feed Rate
Posted: Tue Nov 05, 2024 5:18 am
by suntravel
NeonVortex wrote: ↑Mon Nov 04, 2024 3:37 am
I want to see how you solve the problem
I suppose he set feed rate override back to 100%
Uwe