Page 1 of 2
4 Axis engraving
Posted: Sat Aug 03, 2024 9:22 am
by suntravel
This would be better on a 5 axis mill, but with some redneckstyle angular mounting of the rotary it could be done with 4 axis only...
Turning is Intercon only, for engraving of the magic letters fusion 360.
Uwe
Re: 4 Axis engraving
Posted: Sat Aug 03, 2024 9:28 am
by martyscncgarage
Nice work Uwe!
Marty
Re: 4 Axis engraving
Posted: Thu Aug 08, 2024 8:57 am
by cnckeith
cool! great shots. thanks for posting.
Re: 4 Axis engraving
Posted: Sat Aug 10, 2024 9:16 am
by suntravel
Job done now for the small series....
.... there was not much space left for drilling the 2mm holes.
Uwe
Re: 4 Axis engraving
Posted: Sun Aug 25, 2024 8:23 am
by suntravel
Next project is a large scale ring made from an old ball bearing.
I really like the graph with rotary display.
Uwe
Re: 4 Axis engraving
Posted: Sun Aug 25, 2024 1:09 pm
by suntravel
Not 4 Axis, but for the same machine built as the scale ring.
0.8mm deep engraving ready to lay out with color...
Uwe
Re: 4 Axis engraving
Posted: Tue Aug 27, 2024 9:50 am
by cnckeith
sweet! you are on a roll, what are you building?
Re: 4 Axis engraving
Posted: Tue Aug 27, 2024 10:50 am
by suntravel
cnckeith wrote: ↑Tue Aug 27, 2024 9:50 am
sweet! you are on a roll, what are you building?
A friend is building a dual purpose long shaper/gantry mill with 1500mm stroke
I am helping only with small CNC parts.
Uwe
Re: 4 Axis engraving
Posted: Sat Nov 16, 2024 10:49 am
by suntravel
Here a video how I made the engraving with tilted 4th axis...
Uwe
Re: 4 Axis engraving
Posted: Mon Nov 18, 2024 2:18 am
by ThomasRoan
This ring is very beautiful.